Skip to content

Solutions

Literature

Application Notes

Find out how to apply Juniper Networks technology and solutions to create cost-efficient, scalable IP infrastructures.

Deploying IP Telephony with EX-series SwitchesPDF Icon696KB
This application note describes how the new EX-series Ethernet switches optimize IP telephony environments, including those where voice over IP (VoIP) phones are deployed in conjunction with endpoint hosts such as desktop or laptop computers.

Using Multicast Call Admission Control for IPTV Bandwidth Managementpdf icon294 KB
This application note describes how to manage bandwidth in IPTV networks using the MCAC capabilities of the edge router.

JUNOSe Software Support for DHCP in Service VLANspdf468 KB
This application note provides an overview of extended JUNOSe software feature sets to support Dynamic Host Configuration Protocol (DHCP)-based subscriber management in a service VLAN, improving scalability and availability.

Configuration Options for Hardware Rule Search (RMS) and Software Rule Search (SWRS)pdf119 KB
This document will help customers understand the performance implications of not using Security Zones to partition the rule set when using ASIC-based platforms.

Machine Authentication Using Certificatespdf708 KB

Identity-Based Traffic Logging and Reportingpdf754 KB

Identity-Based Application and Network Profilingpdf958 KB

WAN Routing Configuration Examples for the Secure Services Gateway Familypdf1.1 MB
Outlines a series of routing deployment scenarios and configuration examples (with and without QoS) starting with a basic T1 connection using OSPF and advancing to more elaborate configurations using MLPPP and MLFR. The Configuration Commands required to implement the deployment scenarios on any one of the SSG Family platforms are included in each scenario.

DHCP Subscriber Managementpdf369 KB
Juniper Networks' DHCP implementation integrates with RADIUS to provide the same subscriber management capabilities as PPPoX-based solutions. This paper describes the primary challenges to using DHCP to offer retail services and describes Juniper’s advanced DHCP subscriber management implementation.

Tuning Citrix for Optimal Performance with the WX/WXC Platformspdf icon394 KB
This application note describes how users can fine-tune Citrix for operation with the Juniper WX and WXC application acceleration platforms.

Building the Next Generation Multi-Service Broadband Networkpdf icon457 KB
This paper provides considerations for service providers making the move to multi-play. These considerations include immediate needs to support broadcast IPTV, while establishing an extensible infrastructure to support additional interactive video services.

VoIP Protection with Juniper Networks IDPpdf icon152 KB
This document describes the latest features of the Juniper Networks IDP products designed to prevent attacks based on different VoIP protocols.

Using MPLS Auto-bandwidth in MPLS Networkspdf icon130 KB
Network operators can take advantage of dynamic traffic-engineering features available in JUNOS as they transition to using off-line TE tools.

Streamlining Enterprise Network Management with the Intuitive J-Web Graphical User Interfacepdf icon213 KB
By utilizing the familiar browser-based interface, J-Web delivers a more user-friendly approach to the management of JUNOS routers.

Deploying Enhanced NAT Services in GPRS Networkspdf icon138 KB
This document provides an overview of how Juniper Networks Netscreen firewall products can be deployed in a typical GPRS Gi network to provide enhanced NAT services.

Integrating WX WAN Optimization with Netscreen Firewall/VPNpdf icon758 KB
Application Note describing interoperability options for the WX and NS platforms.

IP Telephony Solution with Juniper, Avaya and Extremepdf icon1.4 MB
Application Note describing a verified reference architecture for WAN IP telephony with these three vendors.

Next Generation Extended Enterprisepdf icon1.9 MB
IVE, Routing, Firewall, IDP, and Application Acceleration.

Network Based VPN/Firewall Servicespdf icon2.0 MB
This document outlines a typical solution that Juniper can build to offer Network-based IPsec VPN and Firewall services.

Building a Secure Virtualized Enterprise Corepdf icon1.1 MB
Reference Design with IPSec and MPLS.

Perimeter Gateway with Firewall, IDP and NSMpdf icon856 KB
This paper addresses the triage (layered) approach to security in the network perimeter.

High Availability at the Central Site Edgepdf icon434 KB
The Central Site Edge, where the enterprise meets the WAN or Internet, contains critical requirements, in terms of both security (from intrusion and denial of service, among other concerns) and high availability. Juniper Networks provides this area with a variety of highavailability solutions.

Introducing MPLS Layer 3 VPNs in Mobile Operator Networkspdf icon373 KB
This paper discusses one approach that mobile operators can use to gradually introduce MPLS VPNs to provide logical network isolation to various mobile services.

Multiservice Networking with the M-seriespdf icon601 KB
This paper provides a basic primer, including configuration snippets, on how to run multiple services such as Layer 3 VPNs, Layer 2 VPNs, VPLS, VPN-aware NAT and stateful firewall as well as other services on a single M-series platform.