- [edit logical-systems logical-system-name protocols mpls],
- [edit logical-systems logical-system-name protocols mpls interface interface-name label-map (in-label | default-route)],
- [edit logical-systems logical-system-name protocols mpls label-switched-path lsp-name],
- [edit logical-systems logical-system-name protocols mpls label-switched-path lsp-name (primary | secondary) path-name],
- [edit logical-systems logical-system-name protocols mpls static-path inet address],
- [edit protocols mpls],
- [edit protocols mpls interface interface-name label-map (in-label | default-route)],
- [edit protocols mpls label-switched-path lsp-name],
- [edit protocols mpls label-switched-path lsp-name (primary | secondary) path-name],
- [edit protocols mpls static-path inet address]
Statement introduced before JUNOS Release 7.4.
Preference for the route.
You can optionally configure multiple LSPs between the same pair of ingress and egress routers. This is useful for balancing the load among the LSPs because all LSPs, by default, have the same preference level. To prefer one LSP over another, set different preference levels for individual LSPs. The LSP with the lowest preference value is used. The default preference for LSPs is lower (more preferred) than all learned routes except direct interface routes.
preference—Preference to assign to the route. A route with a lower preference value is preferred.
See Configuring Preference Values for LSPs, Configuring Static LSPs, and Configuring the Intermediate and Egress Routers for Static LSPs.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.