unit
Sintaxe
unit logical-unit-number {
accept-source-mac {
mac-address mac-address {
policer {
input cos-policer-name;
output cos-policer-name;
}
}
}
accounting-profile name;
advisory-options {
downstream-rate rate;
upstream-rate rate;
}
allow-any-vci;
atm-scheduler-map (map-name | default);
auto-configure {
agent-circuit-identifier {
dynamic-profile profile-name;
}
line-identity {
include {
accept-no-ids;
circuit-id;
remote-id;
}
dynamic-profile profile-name;
}
}
backup-options {
interface interface-name;
}
bandwidth rate;
cell-bundle-size cells;
clear-dont-fragment-bit;
compression {
rtp {
maximum-contexts number <force>;
f-max-period number;
queues [queue-numbers];
port {
minimum port-number;
maximum port-number;
}
}
}
compression-device interface-name;
copy-tos-to-outer-ip-header;
demux {
inet {
address-source address;
auto-configure {
address-ranges {
authentication {
password password-string;
username-include {
auth-server-realm realm-string;
delimiter delimiter-character;
domain-name domain-name;
interface-name;
source-address;
user-prefix user-prefix-string;
}
}
dynamic-profile profile-name {
network ip-address {
range name {
low lower-limit;
high upper-limit;
}
}
}
}
}
}
inet6 {
address-source address;
auto-configure {
address-ranges {
authentication {
password password-string;
username-include {
auth-server-realm realm-string;
delimiter delimiter-character;
domain-name domain-name;
interface-name;
source-address;
user-prefix user-prefix-string;
}
}
dynamic-profile profile-name {
network ip-address {
range name {
low lower-limit;
high upper-limit;
}
}
}
}
}
}
}
demux-destination family;
demux-source family;
demux-options {
underlying-interface interface-name;
}
description text;
etree-ac-role (leaf | root);
interface {
l2tp-interface-id name;
(dedicated | shared);
}
dialer-options {
activation-delay seconds;
callback;
callback-wait-period time;
deactivation-delay seconds;
dial-string [dial-string-numbers];
idle-timeout seconds;
incoming-map {
caller caller-id | accept-all;
initial-route-check seconds;
load-interval seconds;
load-threshold percent;
pool pool-name;
redial-delay time;
watch-list {
[routes];
}
}
}
disable;
disable-mlppp-inner-ppp-pfc;
dlci dlci-identifier;
drop-timeout milliseconds;
dynamic-call-admission-control {
activation-priority priority;
bearer-bandwidth-limit kilobits-per-second;
}
encapsulation type;
epd-threshold cells plp1 cells;
family family-name {
... the family subhierarchy appears after the main [edit interfaces interface-name unit logical-unit-number] hierarchy ...
}
fragment-threshold bytes;
host-prefix-only;
inner-vlan-id-range start start-id end end-id;
input-vlan-map {
(pop | pop-pop | pop-swap | push | push-push | swap |
swap-push | swap-swap);
inner-tag-protocol-id tpid;
inner-vlan-id number;
tag-protocol-id tpid;
vlan-id number;
}
interleave-fragments;
inverse-arp;
layer2-policer {
input-policer policer-name;
input-three-color policer-name;
output-policer policer-name;
output-three-color policer-name;
}
link-layer-overhead percent;
minimum-links number;
mrru bytes;
multicast-dlci dlci-identifier;
multicast-vci vpi-identifier.vci-identifier;
multilink-max-classes number;
multipoint;
oam-liveness {
up-count cells;
down-count cells;
}
oam-period (disable | seconds);
output-vlan-map {
(pop | pop-pop | pop-swap | push | push-push | swap |
swap-push | swap-swap);
inner-tag-protocol-id tpid;
inner-vlan-id number;
tag-protocol-id tpid;
}
passive-monitor-mode;
peer-unit unit-number;
plp-to-clp;
point-to-point;
ppp-options {
mru size;
mtu (size | use-lower-layer);
chap {
access-profile name;
default-chap-secret name;
local-name name;
passive;
}
compression {
acfc;
pfc;
}
dynamic-profile profile-name;
ipcp-suggest-dns-option;
lcp-restart-timer milliseconds;
loopback-clear-timer seconds;
ncp-restart-timer milliseconds;
pap {
access-profile name;
default-pap-password password;
local-name name;
local-password password;
passive;
}
}
pppoe-options {
access-concentrator name;
auto-reconnect seconds;
(client | server);
service-name name;
underlying-interface interface-name;
}
pppoe-underlying-options {
access-concentrator name;
direct-connect;
dynamic-profile profile-name;
max-sessions number;
}
proxy-arp;
service-domain (inside | outside);
shaping {
(cbr rate | rtvbr peak rate sustained rate burst length | vbr peak rate sustained rate burst length);
queue-length number;
}
short-sequence;
targeted-distribution;
transmit-weight number;
(traps | no-traps);
trunk-bandwidth rate;
trunk-id number;
tunnel {
backup-destination address;
destination address;
key number;
routing-instance {
destination routing-instance-name;
}
source source-address;
ttl number;
}
vci vpi-identifier.vci-identifier;
vci-range start start-vci end end-vci;
vpi vpi-identifier;
vlan-id number;
vlan-id-range number-number;
vlan-tags inner tpid.vlan-id outer tpid.vlan-id;
family family {
accounting {
destination-class-usage;
source-class-usage {
(input | output | input output);
}
}
access-concentrator name;
address address {
... the address subhierarchy appears after the main [edit interfaces interface-name unit logical-unit-number family family-name] hierarchy ...
}
bundle interface-name;
core-facing;
demux-destination {
destination-prefix;
}
demux-source {
source-prefix;
}
direct-connect;
duplicate-protection;
dynamic-profile profile-name;
filter {
group filter-group-number;
input filter-name;
input-list [filter-names];
output filter-name;
output-list [filter-names];
}
interface-mode (access | trunk);
ipsec-sa sa-name;
keep-address-and-control;
mac-validate (loose | strict);
max-sessions number;
mtu bytes;
multicast-only;
no-redirects;
policer {
arp policer-template-name;
input policer-template-name;
output policer-template-name;
}
primary;
protocols [inet iso mpls];
proxy inet-address address;
receive-options-packets;
receive-ttl-exceeded;
remote (inet-address address | mac-address address);
rpf-check {
fail-filter filter-name
mode loose;
}
sampling {
input;
output;
}
service {
input {
post-service-filter filter-name;
service-set service-set-name <service-filter filter-name>;
}
output {
service-set service-set-name <service-filter filter-name>;
}
}
service-name-table table-name
targeted-options {
backup backup;
group group;
primary primary;
weight ($junos-interface-target-weight | weight-value);
}
(translate-discard-eligible | no-translate-discard-eligible);
(translate-fecn-and-becn | no-translate-fecn-and-becn);
translate-plp-control-word-de;
unnumbered-address interface-name destination address destination-profile profile-name;
vlan-id number;
vlan-id-list [number number-number];
address address {
arp ip-address (mac | multicast-mac) mac-address <publish>;
broadcast address;
destination address;
destination-profile name;
eui-64;
primary-only;
multipoint-destination address {
dlci dlci-identifier;
epd-threshold cells <plp1 cells>;
inverse-arp;
oam-liveness {
up-count cells;
down-count cells;
}
oam-period (disable | seconds);
shaping {
(cbr rate | rtvbr burst length peak rate sustained rate | vbr burst length peak rate sustained rate);
queue-length number;
}
vci vpi-identifier.vci-identifier;
}
preferred;
primary;
(vrrp-group | vrrp-inet6-group) group-number {
(accept-data | no-accept-data);
advertise–interval seconds;
authentication-type authentication;
authentication-key key;
fast-interval milliseconds;
(preempt | no-preempt) {
hold-time seconds;
}
priority number;
track {
interface interface-name {
bandwidth-threshold bits-per-second priority-cost number;
}
priority-hold-time seconds;
route ip-address/prefix-length routing-instance instance-name priority-cost cost;
}
virtual-address [addresses];
virtual-link-local-address ipv6–address;
vrrp-inherit-from {
active-interface interface-name;
active-group group-number;
}
}
}
}
}
Nível de hierarquia
[edit interfaces interface-name], [edit logical-systems logical-system-name interfaces interface-name], [edit interfaces interface-set interface-set-name interface interface-name]
Descrição
Configure uma interface lógica no dispositivo físico. Você deve configurar uma interface lógica para poder usar o dispositivo físico.
Opções
logical-unit-number— Número da unidade lógica.
Intervalo: 0 a 1.073.741.823 para interfaces estáticas de demux, PPPoE e pseudowire. 0 a 16.385 para todos os outros tipos de interface estática.
etree-ac-role (leaf | root)— Para configurar uma interface como leaf ou root.
As declarações restantes são explicadas separadamente. Procure por uma declaração no CLI Explorer ou clique em uma declaração vinculada na seção Syntax para obter detalhes.
Nível de privilégio exigido
interface — Para visualizar essa declaração na configuração.
controle de interface — para adicionar essa declaração à configuração.
Informações de versão
Declaração introduzida antes do Junos OS Release 7.4.
O intervalo aumentou para interfaces pseudowire estáticas para 1.073.741.823 no Junos OS Release 18.3R1.