- play_arrow Ethernet Interfaces
- play_arrow Interfaces de ethernet agregadas
- Visão geral das interfaces de ethernet agregadas
- Proteção de enlaces de interfaces de ethernet agregadas
- Agendamento em interfaces de ethernet agregadas
- Balanceamento de carga em interfaces de ethernet agregadas
- Monitoramento de desempenho em interfaces de ethernet agregadas
- Gerenciamento periódico de pacotes em interfaces Ethernet
- Agregação de enlaces Ethernet
- play_arrow Gigabit Ethernet Interfaces
- play_arrow Velocidade de porta
- play_arrow Transceptores ópticos OpenZR+ de 400ZR e 400G
- play_arrow Transceptores ópticos de 100GbE, 40GbE e 10GbE
- play_arrow Monitoramento e resolução de problemas de interfaces Ethernet
- play_arrow Monitor Interfaces
- play_arrow Interfaces de solução de problemas
- Configure ferramentas de diagnóstico de interface para testar as conexões físicas de camada
- Localize alarmes e contadores do LINK para ethernet rápida e Gigabit
- Solucionar problemas: Porta ethernet de 10 Gigabits presa em estado baixo
- Verificar o teste de enlaces e transceptores com pseudo-random binary sequence (PRBS)
-
Unused
Hierarchy Level
[edit chassis fpc slot-number pic pic-number port port-number] [edit interface interface-name]
Description
(PTX10003-80C and PTX10003-160C routers) While setting port
0 to 400-Gigabit Ethernet mode (using QSFP56-DD-400GBASE-LR8 optics),
the total bandwidth (speed x number-of-subports) of port
1 has to be less than 100G and port 2 has to configured as 'unused'.
When using port 4 as 400G, port 3 has to be configured with total
bandwidth and port 2 has to be configured 'unused'. Similarly, with
port 5, 9 using 400G, port 6, 8 respectively has to be configured
for less than 100G and port 7 should be configured as 'unused'. That
is, when a port is configured in 400-Gigabit ethernet mode, you cannot
configure speed of the adjacent port to be more then 100-Gbps, and
the middle port (2 between 0~4 or 7 between 5~9) must be set to unused.
To set a particular port to unused port, use unused CLI
command.
You cannot use port 1,3,6 and/or 7 of the same logical PIC.
(JNP10K-LC1201 on PTX10008 routers) To disable the specified physical port in a PIC. If you disable a port, no interfaces (channelized or non-channelized) are created for the port, irrespective of the port profile configuration configured on the port.
The edit chassis hierarchy is available in 20.2R1
Release on PTX10001-36MR. From 20.3R1 onwards you must use only the edit interfaceinterface-name hierarchy.
