show chassis cluster interfaces
语法
show chassis cluster interfaces
描述
显示机箱群集配置中控制接口的状态。
所需权限级别
视图
输出字段
表 1 列出了命令show chassis cluster interfaces
的输出字段。输出字段按其出现的大致顺序列出。
字段名称 |
字段说明 |
---|---|
|
机箱群集控制接口的状态: |
|
|
|
结构接口的状态: |
|
|
|
|
|
|
|
|
示例输出
显示机箱群集接口(SRX5000带 RE3 的系列设备)
user@host> show chassis cluster interfaces Control link status: Down Control interfaces: Index Interface Monitored-Status Internal-SA Security 0 ixlv0 Down Enabled Disabled 1 igb0 Down Enabled Disabled Fabric link status: Down Fabric interfaces: Name Child-interface Status Security (Physical/Monitored) fab0 fab0 Redundant-ethernet Information: Name Status Redundancy-group reth0 Down Not configured reth1 Down Not configured reth2 Down Not configured reth3 Down Not configured reth4 Down Not configured Redundant-pseudo-interface Information: Name Status Redundancy-group lo0 Up 0
示例输出
显示机箱群集接口(SRX5000带 RE2 的系列设备)
user@host> show chassis cluster interfaces Control link status: Up Control interfaces: Index Interface Monitored-Status Internal-SA Security 0 em0 Up Disabled Disabled 1 em1 Down Disabled Disabled Fabric link status: Up Fabric interfaces: Name Child-interface Status Security (Physical/Monitored) fab0 xe-1/0/3 Up / Down Disabled fab0 fab1 xe-7/0/3 Up / Down Disabled fab1 Redundant-ethernet Information: Name Status Redundancy-group reth0 Up 1 reth1 Up 2 reth2 Down Not configured reth3 Down Not configured reth4 Down Not configured reth5 Down Not configured reth6 Down Not configured reth7 Down Not configured reth8 Down Not configured reth9 Down Not configured reth10 Down Not configured reth11 Down Not configured Redundant-pseudo-interface Information: Name Status Redundancy-group lo0 Up 1 Interface Monitoring: Interface Weight Status Redundancy-group ge-0/1/9 100 Up 0 ge-0/1/9 100 Up
示例输出
显示机箱群集接口
user@host> show chassis cluster interfaces
以下输出特定于结构监视故障:
Control link status: Up Control interfaces: Index Interface Monitored-Status Internal-SA Security 0 em0 Up Disabled Disabled Fabric link status: Down Fabric interfaces: Name Child-interface Status Security (Physical/Monitored) fab0 ge-0/0/2 Down / Down Disabled fab0 fab1 ge-9/0/2 Up / Up Disabled fab1 Redundant-pseudo-interface Information: Name Status Redundancy-group lo0 Up 0
示例输出
显示机箱群集接口(SRX5400、SRX5600 和 SRX5800 带有SRX5000系列的 SRX5K-SCB3 [SCB3] 和增强型中板和 SRX5K-MPC3-100G10G [IOC3] 或 SRX5K-MPC3-40G10G [IOC3])
user@host> show chassis cluster interfaces
当 SRX5K-MPC3-40G10G (IOC3) 上包含结构链路的 PIC 断电以打开备用 PIC 时,以下输出特定于机箱群集群集中的SRX5400、SRX5600和SRX5800设备。如果未在打开的 PIC 上配置备用交换矩阵链路,则两个节点之间的 RTO 同步通信将停止,并且机箱群集会话状态将不会备份,因为交换矩阵链路丢失。
Control link status: Up Control interfaces: Index Interface Monitored-Status Internal-SA Security 0 em0 Up Disabled Disabled 1 em1 Down Disabled Disabled Fabric link status: Down Fabric interfaces: Name Child-interface Status Security (Physical/Monitored) fab0 <<< fab child missing once PIC off lined Disabled fab0 fab1 xe-10/2/7 Up / Down Disabled fab1 Redundant-ethernet Information: Name Status Redundancy-group reth0 Up Not configured reth1 Down 1 Redundant-pseudo-interface Information: Name Status Redundancy-group lo0 Up 0
示例输出
显示机箱群集接口(vSRX 虚拟防火墙)
user@host> show chassis cluster interfaces
以下输出特定于查看具有内部 SA 的控制链路状态。
Control link status: Up Control interfaces: Index Interface Status Internal SA 305 0 em0 Up enabled 306 1 em1 Down enabled
示例输出
显示机箱群集接口(SRX1500设备)
user@host> show chassis cluster interfaces
检查机箱群集控制链路和结构链路状态。
Control link status: Up Control interfaces: Index Interface Monitored-Status Internal-SA Security 0 em0 Up Disabled Disabled Fabric link status: Up Fabric interfaces: Name Child-interface Status Security (Physical/Monitored) fab0 ge-0/0/11 Up / Up Disabled fab0 fab1 ge-7/0/11 Up / Up Disabled fab1 Redundant-ethernet Information: Name Status Redundancy-group reth0 Up 1 reth1 Up 1 reth2 Down Not configured reth3 Down Not configured reth4 Down Not configured Redundant-pseudo-interface Information: Name Status Redundancy-group lo0 Up 1 Interface Monitoring: Interface Weight Status Redundancy-group (Physical/Monitored) ge-0/0/4 255 Up / Up 1 ge-7/0/4 255 Up / Up 1 ge-0/0/2 255 Up / Up 1 ge-7/0/2 255 Up / Up 1
命令名称
禁用控制链路后:
Control link status: Admin Down Control interfaces: Index Interface Monitored-Status Internal-SA Security 0 em0 Down Disabled Disabled
示例输出
发布信息
在 Junos OS 9.0 版中修改的命令。输出更改为支持 Junos OS 10.0 版中的双控制端口。输出更改为支持 Junos OS 11.2 版中的控制接口。输出已更改为支持 Junos OS 12.1X44-D10 版中的冗余伪接口。对于SRX5000系列设备,输出已更改为支持 Junos OS 版本 12.1X45-D10 中的内部安全关联 (SA) 选项。输出已更改,以支持 Junos OS 15.1X49-D60 版中控制和结构接口上的 MACsec 状态。对于 vSRX 虚拟防火墙,输出已更改为支持 Junos OS 19.4R1 版中的内部安全关联 (SA) 选项。