- Copyright and Trademark Information
- Table of Contents
- List of Tables
- play_arrow Overview
- play_arrow Configuration
- play_arrow Configuring CESoPSN Bundles (CTP Menu)
- Configuring T1 and E1 Port Parameters for CESoPSN Bundles (CTP Menu)
- Configuring Analog Port Parameters for CESoPSN Bundles (CTP Menu)
- Configuring Serial Port Parameters for CESoPSN Bundles (CTP Menu)
- Configuring DS0 Time Slots for CESoPSN Bundles (CTP Menu)
- Configuring IP Parameters for CESoPSN Bundles on CTP2000 Devices (CTP Menu)
- Configuring IP Parameters for CESoPSN Bundles on CTP150 Devices (CTP Menu)
- Configuring the Missing Packet Fill Pattern for CESoPSN Bundles on CTP150 Devices (CTP Menu)
- Configuring Circuit Restart Parameters for CESoPSN Bundles on CTP150 Devices (CTP Menu)
- play_arrow Configuring CESoPSN Bundles (CTPView)
- Configuring T1 and E1 Port Parameters for CESoPSN Bundles (CTPView)
- Configuring Analog Port Parameters for CESoPSN Bundles (CTPView)
- Configuring Serial Port Parameters for CESoPSN Bundles (CTPView)
- Configuring DS0 Time Slots for CESoPSN Bundles (CTPView)
- Configuring IP Parameters for CESoPSN Bundles on CTP2000 Devices (CTPView)
- Configuring IP Parameters for CESoPSN Bundles on CTP150 Devices (CTPView)
- Configuring the Missing Packet Fill Pattern for CESoPSN Bundles on CTP150 Devices (CTPView)
- Configuring Circuit Restart Parameters for CESoPSN Bundles on CTP150 Devices (CTPView)
- play_arrow Administration
BERT Testing for CESoPSN Bundles Overview
The CTP series provides Bit Error Rate Tests (BERT) for bundles. Each bundle can have a BERT transmitter and receiver that can transmit and receive a pseudorandom sequence of data using a pattern that you specify. You can set up the BERT to transmit the data sequence toward the serial interface or toward the IP network. User data is replaced with the data sequence in the direction that you select.
You can set up BERTs in the following directions:
Toward the serial interface and the attached customer device.
Toward the IP network and the remote customer device. This configuration is called end-to-end BERT.
BERTs do not run on bundles that use transparent encoding or on fractional T1/E1 bundles.