Policy Enforcer Log File Locations

The following Policy Enforcer configuration settings files are located under /srv/feeder/etc/log:

Note

Do not edit these files unless instructed by the Juniper Networks Technical Assistance Center (JTAC).

Table 1: Policy Enforcer Configuration Settings Files

Configuration settings files	Description	Example
controller_log.yml	Defines the format for the controller.log file	Message and date format and maximum file size.
feed_collector_log.yml	Defines the format for the feed_collector.log file	Message and date format and maximum file size.
feed_provider_log.yml	Defines the format for the feed_provider.log file.	Message and date format and maximum file size.

The following Policy Enforcer log files are located under /srv/feeder/log. By default, a maximum of 10 files are created for each log file. For example, controller.log, controller.log.1, controller.log.2, etc. After 10 files are created, the oldest file (in this example, controller.log) is overwritten next.

Table 2: Policy Enforcer Log Files under /srv/feeder/log

Log files	Description
controller.log	Contains log messages for the interaction of Security Director with Policy Enforcer.
feed_collector.log	Contains log messages for the downloading of feeds.
feed_provider.log	Contains log messages for distributing feeds to the SRX Series devices.

The following Policy Enforcer log files are located under /var/log:

Table 3: Policy Enforcer Log Files under /var/log

Log files	Description
prepare_vm.log	Contains information about your Policy Enforcer software installation.
pe_upgrade.log	Contains information about your Policy Software software upgrade.