close
keyboard_arrow_left
Table of Contents
- play_arrow Hierarchical Class of Service
- play_arrow Configuring Hierarchical Class of Service on MX Series 5G Universal Routing Platforms
- Hierarchical Class of Service Overview
- Hierarchical Class of Service Network Scenarios
- Understanding Hierarchical Scheduling
- Priority Propagation in Hierarchical Scheduling
- Hierarchical CoS for Metro Ethernet Environments
- Hierarchical Schedulers and Traffic Control Profiles
- Example: Building a Four-Level Hierarchy of Schedulers
- Scheduling and Shaping in Hierarchical CoS Queues for Traffic Routed to GRE Tunnels
- Example: Performing Output Scheduling and Shaping in Hierarchical CoS Queues for Traffic Routed to GRE Tunnels
- Configuring Ingress Hierarchical CoS
- Hierarchical Class of Service for Network Slicing
- play_arrow Configuring Hierarchical Class of Service on MICs, MPCs, MLCs, and Aggregated Ethernet Interfaces
- Understanding Hierarchical Scheduling for MIC and MPC Interfaces
- Configuring Ingress Hierarchical CoS on MIC and MPC Interfaces
- Per-Unit Scheduling and Hierarchical Scheduling for MPC Interfaces
- Dedicated Queue Scaling for CoS Configurations on MIC and MPC Interfaces Overview
- Jitter Reduction in Hierarchical CoS Queues
- Example: Reducing Jitter in Hierarchical CoS Queues
- Hierarchical Schedulers on Aggregated Ethernet Interfaces Overview
- Configuring Hierarchical Schedulers on Aggregated Ethernet Interfaces
- Example: Configuring Scheduling Modes on Aggregated Interfaces
- Increasing Available Bandwidth on Rich-Queuing MPCs by Bypassing the Queuing Chip
-
- play_arrow Configuration Statements and Operational Commands
list Table of Contents
Configuring Hierarchical CoS on a Static PPPoE Subscriber Interface
date_range
17-Dec-24
Before you begin:
Configure the static PPPoE subscriber interface.
You can configure hierarchical CoS on a static PPPoE subscriber interface.
To configure hierarchical CoS on a static PPPoE subscriber interface:
You can now configure static traffic and scheduling parameters for each traffic-control profile, and attach each traffic-control profile to the PPPoE interface or the PPPoE interface set. For more information, see Using the CLI to Modify Traffic-Control Profiles That Are Currently Applied to Subscribers.
