Navigation
Related Documentation
- AX, SRX Series
- Understanding How the Access Point Obtains an IP Address
- Understanding Layer 2 Forwarding Operations
- Understanding NTP Support
- Understanding 802.1x Authentication of the Access Point
- Additional Information
- WLAN Feature Guide for Security Devices
System and Network Configuration Overview
Configure the following system and network settings for the access point:
- Interface on the SRX Series device to which the access point is connected.
- System settings, which include:
- Network Time Protocol (NTP) server.
- Console port baud rate.
- Ethernet settings, including static IP address and default gateway, management and untagged VLAN IDs, and DNS server address.
- If your network uses IEEE 802.1x standard port-based network authentication control to allow devices to connect, the access point can be configured to provide a username and password for authentication.
Related Documentation
- AX, SRX Series
- Understanding How the Access Point Obtains an IP Address
- Understanding Layer 2 Forwarding Operations
- Understanding NTP Support
- Understanding 802.1x Authentication of the Access Point
- Additional Information
- WLAN Feature Guide for Security Devices
Published: 2014-05-22
Related Documentation
- AX, SRX Series
- Understanding How the Access Point Obtains an IP Address
- Understanding Layer 2 Forwarding Operations
- Understanding NTP Support
- Understanding 802.1x Authentication of the Access Point
- Additional Information
- WLAN Feature Guide for Security Devices
