Navigation
virtual-access-point
Syntax
virtual-access-point number {description description;http-redirect {redirect-url redirect-url;}no-broadcast-ssid;security {dot1x {radius-server ip-address;radius-key radius-key;broadcast-key-refresh-rate minutes;session-key-refresh-rate minutes;}mac-authentication-type ( disabled | local | radius );none;static-wep {authentication-type (open | shared | both);key-length (64bits | 128bits);key-type ( ascii | hex );transfer-key-index (1|2|3|4);wep-key-1 key;wep-key-2 key;wep-key-3 key;wep-key-4 key;}wpa-enterprise {broadcast-key-refresh-rate minutes;cipher-suites (tkip | ccmp | both);pre-authenticate;radius-key secret-key;radius-server ip-address;session-key-refresh-rate minutes;wpa-version (v1 | v2 | both);}wpa-personal {broadcast-key-refresh-rate minutes;cipher-suites (tkip | ccmp | both);key key;wpa-version (v1 | v2 | both);}}ssid ssid;vlan vlan-id;}
Hierarchy Level
[edit wlan access-point name radio (1 | 2) ]
Release Information
Statement introduced in Release 10.0 of Junos OS.
Description
Configure virtual access point for an access point radio.
Options
virtual-access-point id—Virtual access point identifier. Specify an identifier from 0 through 15.
 | Note: VAP 0 is the physical radio interface. VAP 0 is assigned to the BSSID of the physical radio interface. |
| Note: VAP 0 is always enabled. To disable VAP 0, the radio itself must be disabled. |
description—Description of the virtual access point.
The remaining statements are explained separately. See CLI Explorer.
Required Privilege Level
wlan—To view this statement in the configuration.
wlan-control—To add this statement to the configuration.
