Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
Directing RPM Probes to Select BGP Devices
If a device has a large number of BGP neighbors configured, you can direct (filter) the RPM probes to a selected group of BGP neighbors rather than to all the neighbors. To identify the BGP devices to receive RPM probes, you can configure routing instances.
The following example requires you to navigate various levels in the configuration hierarchy. For instructions on how to do that, see Using the CLI Editor in Configuration Mode.
To direct RPM probes to select BGP neighbors:
- Configure routing instance RI1 to send RPM
probes to BGP neighbors within the routing instance.[edit services rpm bgp]user@host# set routing-instances RI1
- If you are done configuring the device, enter commit from configuration mode.
