Navigation
Supported Platforms
hold-time (Protocols LDP)
Syntax
hold-time seconds;
Hierarchy Level
[edit logical-systems logical-system-name protocols ldp interface interface-name],[edit logical-systems logical-system-name protocols ldp targeted-hello],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols ldp interface interface-name],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols ldp targeted-hello],[edit protocols ldp interface interface-name],[edit protocols ldp targeted-hello],[edit routing-instances routing-instance-name protocols ldp interface interface-name],[edit routing-instances routing-instance-name protocols ldp targeted-hello]
Release Information
Statement introduced before Junos OS Release 7.4.
Support for LDP targeted hellos added in Junos OS Release 9.5.
Description
Specify how long an LDP node should wait for a hello message before declaring a neighbor to be down. This value is sent as part of a hello message so that each LDP node tells its neighbors how long to wait. You can specify times for both link hello messages and targeted hello messages depending on the hierarchy level at which you configure the hold-time statement.
Options
seconds—Hold-time value.
Range: 1 through 65,535 seconds
Default: 15 seconds for link hello messages, 45 seconds for targeted hello messages
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
