Supported Platforms
sync-interval
Syntax
Hierarchy Level
Description
Specify the rate at which synchronization messages are requested to be sent from the master to the slave. The sync-interval is configured on the slave. The specified value is the log2 value of the requested synchronous packet rate. Because the accepted value varies from –6 to 0, the specified packet rate is from 2^–6 to 2^0 or from 64 packets per second to 1 packet per second.
 | Note: The configuration of the sync-interval statement is effective only when the unicast-negotiation statement is also configured at the [edit protocols ptp] hierarchy level. |
Options
interval—Synchronization interval packets per second for messages sent from the master to the slave.
Range: –6 to 0 packets per second
Default: –6
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
