Navigation
Introduction to Configuring Layer 2 Circuits
To configure a Layer 2 circuit, include the l2circuit statement:
l2circuit {local-switching {interface interface-name {description text;end-interface {interface interface-name;protect-interface interface-name;}ignore-mtu-mismatch;protect-interface interface-name;}}neighbor address {interface interface-name {community community-name;(control-word | no-control-word);description text;encapsulation-type type;mtu mtu-number;protect-interface interface-name;psn-tunnel-endpoint address;static {incoming-label label;outgoing-label label;}virtual-circuit-id identifier;}}traceoptions {file filename <files number> <size size> <world-readable | no-world-readable>;flag flag <flag-modifier> <disable>;}}
You can include this statement at the following hierarchy levels:
- [edit protocols]
- [edit logical-systems logical-system-name protocols]
