Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

TechLibrary
Navigation

G.703 2.048MHz Signal Type for BITS Interfaces Overview

The ITU-T Recommendation G.703, Physical/electrical characteristics of hierarchical digital interfaces, is a standard method for encoding clock and data signals into a single signal. This signal is then used to synchronize various data communications devices, such as switches, routers and multiplexers at a data rate of 2.048 MHz. Both directions of the G.703 signal must use the same signal type. To configure signal type parameters for a building-integrated timing supply (BITS) interface, include the following statements at the [edit chassis synchronization ] hierarchy level:

interfaces bits {
     signal-type (2048khz | e1 | t1);
          e1-options {
               framing (g704 | g704-no-crc4);
          }
          t1-options {
               framing (esf | sf);
          }
     }
}
 

Related Documentation

 

Published: 2013-01-11

Supported Platforms

 

Related Documentation

 

Published: 2013-01-11

Previous Page Next Page