Related Documentation
PPP MIB
The Juniper Networks enterprise-specific PPP MIB, whose object ID is {jnxPppMibRoot 1}, extends SNMP support for the Point-to-Point Protocol (PPP) modules in Junos OS.
The PPP MIB stores PPP-related information, such as the authentication type, status of the operation of network protocols over each link, PPP session status, PPP interface characteristics, and statistics. You can view this information by using SNMP get and get-next requests.
 | Note: The PPP MIB is supported on the Common Edge PPP process, jpppd. SNMP support for PPP over PPPoE interfaces is active only if the jpppd process is enabled. |
For a downloadable version of this MIB, see https://www.juniper.net/techpubs/en_US/junos12.3/topics/reference/ mibs/mib-jnx-ppp.txt.
For information about enterprise-specific PPP MIB objects, see the following topics:
- PPP MIB Textual Conventions
- Managed Objects for PPP Link Control Protocol Layer
- Managed Objects for PPP IP Network Control Protocol Layer
- Managed Objects for PPP OSI Network Control Protocol Layer
- Managed Objects for PPP Session Attributes
- Managed Objects for Multilink PPP Layer
- Managed Objects for PPP Interface Summary Counts
- Managed Objects for PPP IPv6 Network Control Protocol Layer
- Managed Objects for PPP Global Attributes
