Supported Platforms
Related Documentation
Identifying a Routing Instance
With this feature, routing instances are identified by either the context field in v3 requests or encoded in the community string in v1 or v2c requests.
When encoded in a community string, the routing instance name appears first and is separated from the actual community string by the @ character.
To avoid conflicts with valid community strings that contain the @ character, the community is parsed only if typical community string processing fails. For example, if a routing instance named RI is configured, an SNMP request with RI@public is processed within the context of the RI routing instance. Access control (views, source address restrictions, access privileges, and so on) is applied according to the actual community string (the set of data after the @ character—in this case public). However, if the community string RI@public is configured, the protocol data unit (PDU) is processed according to that community and the embedded routing instance name is ignored.
Logical systems perform a subset of the actions of a physical router and have their own unique routing tables, interfaces, policies, and routing instances. When a routing instance is defined within a logical system, the logical system name must be encoded along with the routing instance using a slash ( / ) to separate the two. For example, if the routing instance RI is configured within the logical system LS, that routing instance must be encoded within a community string as LS/RI@public. When a routing instance is configured outside a logical system (within the default logical system), no logical system name (or / character) is needed.
Also, when a logical system is created, a default routing instance (named default) is always created within the logical system. This name should be used when querying data for that routing instance (for example, LS/default@public). For v3 requests, the name logical system/routing instance should be identified directly in the context field.
 | Note: To identify a virtual LAN (VLAN) spanning-tree instance (VSTP on MX Series 3D Universal Edge Routers), specify the routing instance name followed by a double colon (::) and the VLAN ID. For example, to identify VSTP instance for VLAN 10 in the global default routing instance, include default::10@public in the context (SNMPv3) or community (SNMPv1 or v2) string. |
