Navigation
Related Documentation
- EX, J, M, MX, PTX, T Series
- Example: Configuring Interfaces Using Junos OS Configuration Groups
- Example: Configuring Peer Entities
- Example: Referencing the Preset Statement From the Junos defaults Group
- Example: Viewing Default Statements That Have Been Applied to the Configuration
- Example : Configuring Sets of Statements with Configuration Groups
- Example: Configuring a Consistent IP Address for the Management Interface
- Creating a Junos Configuration Group
- T Series
- Example: Creating and Applying Configuration Groups on a TX Matrix Router
Example: Configuring and Applying Junos Configuration Groups
In this example, the SNMP configuration is divided between the group basic and the normal configuration hierarchy.
There are a number of advantages to placing the system-specific configuration (SNMP contact) into a configuration group and thus separating it from the normal configuration hierarchy—the user can replace (using the load replace command) either section without discarding data from the other.
In addition, setting a contact for a specific box is now possible because the group data would be hidden by the router-specific data.
[edit]groups {basic { # User-defined group namesnmp { # This group contains some SNMP datacontact "My Engineering Group";community BasicAccess {authorization read-only;}}}}apply-groups basic; # Enable inheritance from group "basic"snmp { # Some normal (non-group) configurationlocation "West of Nowhere";}
This configuration is equivalent to the following:
[edit]snmp {location "West of Nowhere";contact "My Engineering Group";community BasicAccess {authorization read-only;}}
For information about how to disable inheritance of a configuration group, see Disabling Inheritance of a Junos OS Configuration Group.
Related Documentation
- EX, J, M, MX, PTX, T Series
- Example: Configuring Interfaces Using Junos OS Configuration Groups
- Example: Configuring Peer Entities
- Example: Referencing the Preset Statement From the Junos defaults Group
- Example: Viewing Default Statements That Have Been Applied to the Configuration
- Example : Configuring Sets of Statements with Configuration Groups
- Example: Configuring a Consistent IP Address for the Management Interface
- Creating a Junos Configuration Group
- T Series
- Example: Creating and Applying Configuration Groups on a TX Matrix Router
Published: 2012-11-27
Related Documentation
- EX, J, M, MX, PTX, T Series
- Example: Configuring Interfaces Using Junos OS Configuration Groups
- Example: Configuring Peer Entities
- Example: Referencing the Preset Statement From the Junos defaults Group
- Example: Viewing Default Statements That Have Been Applied to the Configuration
- Example : Configuring Sets of Statements with Configuration Groups
- Example: Configuring a Consistent IP Address for the Management Interface
- Creating a Junos Configuration Group
- T Series
- Example: Creating and Applying Configuration Groups on a TX Matrix Router
