Supported Platforms
Related Documentation
- EX, J, M, MX, PTX, T Series, QFabric System, QFX Series standalone switches
- show pim join
clear pim join
List of Syntax
SyntaxSyntax (EX Series Switch and the QFX Series)
Syntax
Syntax (EX Series Switch and the QFX Series)
Release Information
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
inet6 and instance options introduced in Junos OS Release 10.0 for EX Series switches.
Command introduced in Junos OS Release 11.3 for the QFX Series.
Description
Clear the Protocol Independent Multicast (PIM) join and prune states.
Options
none—Clear PIM register message counters for all family addresses, instances, and interfaces.
all | — | (Optional) Explicitly clear all PIM join/prune states. |
group-address | — | (Optional) Clear the PIM join and prune states for a group address. |
inet | inet6 | — | (Optional) Clear the PIM join and prune states for IPv4 or IPv6 family addresses, respectively. |
instance instance-name | — | (Optional) Clear the join and prune states for a specific PIM-enabled routing instance. |
logical-system (all | logical-system-name) | — | (Optional) Perform this operation on all logical systems or on a particular logical system. |
Additional Information
The clear pim join command cannot be used to clear the PIM join and prune state on a backup Routing Engine when nonstop active routing is enabled.
Required Privilege Level
clear
Related Documentation
- EX, J, M, MX, PTX, T Series, QFabric System, QFX Series standalone switches
- show pim join
List of Sample Output
clear pim joinOutput Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
clear pim join
user@host> clear pim join Modified: 2015-08-20
Supported Platforms
Related Documentation
- EX, J, M, MX, PTX, T Series, QFabric System, QFX Series standalone switches
- show pim join
