Supported Platforms
request ancp oam neighbor
Syntax
Release Information
Command introduced in Junos OS Release 11.4.
Description
Trigger the access node to run a loopback test on the local loop between the access node and the customer premises equipment. You must specify both the access node and the subscriber. The access node responds to the NAS with the results of the test.
Options
ip-address ip-address | — | IP address that specifies the access node on whose local loop the loopback test is run. |
system-name neighbor-name | — | System name that specifies the access node on whose local loop the loopback test is run. |
subscriber identifier-string | — | Access identifier that specifies the subscriber on whose local loop the loopback test is run. |
count count | — | (Optional) Number of times a loopback message is sent
on the local loop. |
timeout duration | — | (Optional) Period of time in seconds that the NAS
waits for a response to the OAM request. |
Required Privilege Level
view
List of Sample Output
request ancp oam subscriberOutput Fields
When you enter this command, you are provided feedback on the status of your request, including the result of the test, the response code, and the response string returned with the OAM response in the event of failure, an error code is displayed.
Sample Output
request ancp oam subscriber
user@host> request ancp oam neighbor 10.10.10.1
subscriber “dslam port-1-11” request succeeded 0x503 : DSL line status showtime DEFAULT RESPONSE
