Supported Platforms
restart chassis-control
Syntax
Syntax (MX Series Routers)
Syntax (PTX Series)
Release Information
Command introduced before JUNOS Release 7.4.
Command introduced in Junos OS Release 12.3 for MX2020 3D Universal Edge Routers.
Command introduced in Junos OS Release 12.3 for MX2010 3D Universal Edge Routers.
Description
Restart the chassis management process.
Options
lcc number | — | (Routing matrix only) (Optional) Restart the software process for a specific T640 routing node that is connected to a TX Matrix platform. Replace number with a value from 0 through 3. |
sfc number | — | (TX Matrix Plus routers only) (Optional) Restart the software process on the TX Matrix Plus router (or switch-fabric chassis). Replace number with 0. |
gracefully | — | (Optional) Restart the software process. |
immediately | — | (Optional) Immediately restart the software process. |
soft | — | (Optional) Reread and reactivate the configuration without completely restarting the software processes. For example, Border Gateway Protocol (BGP) peers stay up and the routing table stays constant. Omitting this option results in a graceful restart of the software process. |
Required Privilege Level
reset
List of Sample Output
restart chassis-control gracefullyrestart chassis-control soft
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
restart chassis-control gracefully
user@host> restart chassis-control gracefully Chassis control process started, pid 1631
restart chassis-control soft
user@host> restart chassis-control soft Chassis control process started, pid 1653
