Supported Platforms
Related Documentation
- ACX, M, MX, PTX, SRX, T Series
- reliable
- M, PTX, T Series
- Configuring RSVP Interfaces
aggregate (Protocols RSVP)
Syntax
Hierarchy Level
Release Information
Statement introduced before Junos OS Release 7.4.
Description
Control the use of RSVP aggregate messages on an interface or peer interface:
- aggregate—Use RSVP aggregate messages.
- no-aggregate—Do not use RSVP aggregate
messages.
Aggregate messages can pack multiple RSVP messages into a single transmission, thereby reducing network overhead and enhancing efficiency. The number of supportable sessions and processing overhead are significantly improved when aggregation is enabled.
Not all routers connected to a subnet need to support aggregation simultaneously. Each RSVP router negotiates its intention to use aggregate messages on a per-neighbor basis. Only when both routers agree are aggregate messages sent.
To have refresh reduction and reliable delivery, you must include the aggregate and reliable statements.
Default
Aggregation is disabled.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- ACX, M, MX, PTX, SRX, T Series
- reliable
- M, PTX, T Series
- Configuring RSVP Interfaces
Published: 2012-11-29
Supported Platforms
Related Documentation
- ACX, M, MX, PTX, SRX, T Series
- reliable
- M, PTX, T Series
- Configuring RSVP Interfaces
