Related Documentation
- ACX, J, M, MX, PTX, QFX, SRX, T Series
- Example: Configuring BFD for Static Routes
bfd-liveness-detection (VPLS)
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 10.0.
Description
Configure bidirectional failure detection timers.
The BFD failure detection timers are adaptive and can be adjusted to be more or less aggressive. For example, the timers can adapt to a higher value if the adjacency fails, or a neighbor can negotiate a higher value for a timer than the configured value. The timers adapt to a higher value when a BFD session flap occurs more than three times in a span of 15 seconds. A back-off algorithm increases the receive (Rx) interval by two if the local BFD instance is the reason for the session flap. The transmission (Tx) interval is increased by two if the remote BFD instance is the reason for the session flap. You can use the clear bfd adaptation command to return BFD interval timers to their configured values. The clear bfd adaptation command is hitless, meaning that the command does not affect traffic flow on the routing device.
The remaining statements are explained separately.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- ACX, J, M, MX, PTX, QFX, SRX, T Series
- Example: Configuring BFD for Static Routes
Published: 2012-11-29
Related Documentation
- ACX, J, M, MX, PTX, QFX, SRX, T Series
- Example: Configuring BFD for Static Routes
