Supported Platforms
Related Documentation
- M, MX, T Series
- Configuring E3 and T3 Parameters on ATM Interfaces
- M, T Series
- Disabling T3 C-Bit Parity Mode
cbit-parity
Syntax
Hierarchy Level
Release Information
Statement introduced before Junos OS Release 7.4.
Description
For T3 interfaces only, enable or disable C-bit parity mode, which controls the type of framing that is present on the transmitted T3 signal. When C-bit parity mode is enabled, the C-bit positions are used for the far-end block error (FEBE), far-end alarm and control (FEAC), terminal data link, path parity, and mode indicator bits, as defined in ANSI T1.107a-1989. For ATM and ATM2 IQ2 and IQ2-E interfaces, M23 framing is used when the no-cbit-parity statement is included. For all other interfaces, M13 framing is used when the no-cbit-parity statement is included.
Default
C-bit parity mode is enabled.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Documentation
- M, MX, T Series
- Configuring E3 and T3 Parameters on ATM Interfaces
- M, T Series
- Disabling T3 C-Bit Parity Mode
Published: 2012-12-11
Supported Platforms
Related Documentation
- M, MX, T Series
- Configuring E3 and T3 Parameters on ATM Interfaces
- M, T Series
- Disabling T3 C-Bit Parity Mode