Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

TechLibrary
Navigation

cluster

Syntax

cluster cluster-identifier;

Hierarchy Level

[edit logical-systems logical-system-name protocols bgp],[edit logical-systems logical-system-name protocols bgp group group-name],[edit logical-systems logical-system-name protocols bgp group group-name neighbor address],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols bgp],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols bgp group group-name],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols bgp group group-name neighbor address],[edit protocols bgp],[edit protocols bgp group group-name],[edit protocols bgp group group-name neighbor address],[edit routing-instances routing-instance-name protocols bgp],[edit routing-instances routing-instance-name protocols bgp group group-name],[edit routing-instances routing-instance-name protocols bgp group group-name neighbor address]

Release Information

Statement introduced before Junos OS Release 7.4.

Statement introduced in Junos OS Release 9.0 for EX Series switches.

Statement introduced in Junos OS Release 11.3 for the QFX Series.

Description

Specify the cluster identifier to be used by the route reflector cluster in an internal BGP group.

If you configure both route reflection and VPNs on the same routing device, the following modifications to the route reflection configuration cause current BGP sessions to be reset:

  • Adding a cluster ID—If a BGP session shares the same AS number with the group where you add the cluster ID, all BGP sessions are reset regardless of whether the BGP sessions are contained in the same group.
  • Creating a new route reflector—If you have an IBGP group with an AS number and create a new route reflector group with the same AS number, all BGP sessions in the IBGP group and the new route reflector group are reset.

Note: If you change the address family specified in the [edit protocols bgp family] hierarchy level, all current BGP sessions on the routing device are dropped and then reestablished.

Options

cluster-identifier—4-byte number (such as an IPv4 address).

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.

 

Related Documentation

 

Published: 2013-04-18

Previous Page Next Page