Related Documentation
- ACX, M, MX, T Series
- Configuring Interfaces for Layer 2 Circuits
- EX Series
- Configuring an MPLS-Based Layer 2 VPN (CLI Procedure)
- M, MX, PTX, T Series
- Configuring the Local Site on PE Routers in Layer 2 VPNs
- M, MX, T Series
- Configuring VPLS Routing Instances
encapsulation-type (Layer 2 VPNs)
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 9.2.
Statement introduced in Junos OS Release 11.1 for EX Series switches.
Description
Specify the type of Layer 2 traffic originating from the CE device. Only the ethernet and ethernet-vlan encapsulation types are supported for VPLS. Not all encapsulation types are supported on the switches. See the switch CLI.
Options
atm-aal5—ATM Adaptation Layer (AAL/5)
atm-cell—ATM cell relay
atm-cell-port-mode—ATM cell relay port promiscuous mode
atm-cell-vc-mode—ATM VC cell relay nonpromiscuous mode
atm-cell-vp-mode—ATM virtual path (VP) cell relay promiscuous mode
cesop—CESOP-based Layer 2 VPN
cisco-hdlc—Cisco Systems–compatible HDLC
ethernet—Ethernet
ethernet-vlan—Ethernet VLAN
frame-relay—Frame Relay
frame-relay-port-mode—Frame Relay port mode
interworking—Layer 2.5 interworking VPN
ppp—PPP
satsop-e1—SATSOP-E1–based Layer 2 VPN
satsop-e3—SATSOP-E3–based Layer 2 VPN
satsop-t1—SATSOP-T1–based Layer 2 VPN
satsop-t3—SATSOP-T3–based Layer 2 VPN
Default: For VPLS networks, the default encapsulation type is ethernet.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- ACX, M, MX, T Series
- Configuring Interfaces for Layer 2 Circuits
- EX Series
- Configuring an MPLS-Based Layer 2 VPN (CLI Procedure)
- M, MX, PTX, T Series
- Configuring the Local Site on PE Routers in Layer 2 VPNs
- M, MX, T Series
- Configuring VPLS Routing Instances
Published: 2012-12-07
Related Documentation
- ACX, M, MX, T Series
- Configuring Interfaces for Layer 2 Circuits
- EX Series
- Configuring an MPLS-Based Layer 2 VPN (CLI Procedure)
- M, MX, PTX, T Series
- Configuring the Local Site on PE Routers in Layer 2 VPNs
- M, MX, T Series
- Configuring VPLS Routing Instances