Supported Platforms
fpc
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 9.4 for EX Series switches.
Description
On an EX3200 or an EX4200 switch, specify the port of the SFP+ uplink module for which you want to configure the operating mode.
On an EX6200 or an EX8200 switch, specify the line card slot for which you want to assign a power priority.
 | Note: On an EX6200 switch, you cannot change the power priority of a slot containing a Switch Fabric and Routing Engine (SRE) module. Although the CLI allows you to set a different power priority for the slot, your change does not go into effect, and the power priority remains 0. A message is sent to the system log to inform you that changing the power priority of the slot is unsupported. |
For generic routing encapsulation (GRE) tunneling, use the fpc statement with the tunnel-port statement to specify the port on the switch that you want to convert to a GRE tunnel port.
Options
slot—Number of the slot:
- 0—EX3200 and standalone EX4200 switches. The FPC value refers to the switch itself.
- 0–9—EX4200 switch in a Virtual Chassis configuration. The value corresponds to the switch’s member ID.
- 0–3 and 6–9—EX6210 switch. The slot
is a line card slot.
4–5—The slot is a line card slot or an SRE module slot.
- 0–7—EX8208 switch. The slot is a line card slot.
- 0–15—EX8216 switch. The slot is a line card slot.
The remaining statements are explained separately.
Required Privilege Level
interface—To view this statement in the
configuration.
interface-control—To add this
statement to the configuration.
