Navigation
Supported Platforms
Related Documentation
- J, M, MX, SRX, T Series
- Configuring the Number of MLD Multicast Group Joins on Logical Interfaces
group-limit
Syntax
group-limit limit;
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 10.4.
Description
Configure a limit for the number of multicast groups (or [S,G] channels in MLDv2) allowed on a logical interface. After this limit is reached, new reports are ignored and all related flows are not flooded on the interface.
To confirm the configured group limit on the interface, use the show mld interface command.
Default
By default, there is no limit to the number of multicast groups that can join the interface.
Options
limit—group value limit for the interface.
Range: 1 through 32767
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- J, M, MX, SRX, T Series
- Configuring the Number of MLD Multicast Group Joins on Logical Interfaces
Published: 2013-04-03
Supported Platforms
Related Documentation
- J, M, MX, SRX, T Series
- Configuring the Number of MLD Multicast Group Joins on Logical Interfaces
