Navigation
Supported Platforms
Related Documentation
- ACX, M, MX, PTX, QFX, T Series
- Example: Configuring Synchronization Between IS-IS and LDP
hold-time (LDP Synchronization for IS-IS)
Syntax
hold-time seconds;
Hierarchy Level
[edit logical-systems logical-system-name protocols isis interface interface-name ldp-synchronization],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols isis interface interface-name ldp-synchronization],[edit protocols isis interface interface-name ldp-synchronization],[edit routing-instances routing-instance-name protocols isis interface interface-name ldp-synchronization]
Release Information
Statement introduced in Junos OS Release 7.5.
Description
Configure the time period to advertise the maximum cost metric for a link that is not fully operational.
 | Note: When an interface has been in the holddown state for more than 3 minutes, a system log message with a warning level is sent. This message appears in both the messages file and the trace file. |
Options
seconds—Hold-time value, in seconds.
Range: 1 through 65,535 seconds
Default: Infinity
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- ACX, M, MX, PTX, QFX, T Series
- Example: Configuring Synchronization Between IS-IS and LDP
Published: 2013-01-22
Supported Platforms
Related Documentation
- ACX, M, MX, PTX, QFX, T Series
- Example: Configuring Synchronization Between IS-IS and LDP
