Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation

hold-time (Protocols LDP)

Syntax

hold-time seconds;

Hierarchy Level

[edit logical-systems logical-system-name protocols ldp interface interface-name],[edit logical-systems logical-system-name protocols ldp targeted-hello],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols ldp interface interface-name],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols ldp targeted-hello],[edit protocols ldp interface interface-name],[edit protocols ldp targeted-hello],[edit routing-instances routing-instance-name protocols ldp interface interface-name],[edit routing-instances routing-instance-name protocols ldp targeted-hello]

Release Information

Statement introduced before Junos OS Release 7.4.

Support for LDP targeted hellos added in Junos OS Release 9.5.

Statement introduced in Junos OS Release 12.3X50 for the QFX Series.

Description

Specify how long an LDP node should wait for a hello message before declaring a neighbor to be down. This value is sent as part of a hello message so that each LDP node tells its neighbors how long to wait. You can specify times for both link hello messages and targeted hello messages depending on the hierarchy level at which you configure the hold-time statement.

Options

seconds—Hold-time value.

Range: 1 through 65,535 seconds

Default: 15 seconds for link hello messages, 45 seconds for targeted hello messages

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.

Published: 2014-10-03