Supported Platforms
Related Documentation
- ACX, EX, J, M, MX, PTX, QFX, SRX, T Series
- Example: Configuring RIP Timers
- ACX, EX, J, MX, SRX, T Series
- RIP Demand Circuits Overview
holddown (Protocols RIP)
Syntax
Hierarchy Level
Release Information
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 12.1 for the QFX Series.
Description
Configure how long the expired route is retained in the routing table before being removed.
When the hold-down timer runs on RIP demand circuits, routes are advertised as unreachable on other interfaces. When the hold-down timer expires, the route is removed from the routing table if all destinations detect that the route is unreachable or the remaining destinations are down.
Options
seconds—Estimated time to wait before making updates to the routing table.
Range: 10 through 180 seconds
Default: 180 seconds
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- ACX, EX, J, M, MX, PTX, QFX, SRX, T Series
- Example: Configuring RIP Timers
- ACX, EX, J, MX, SRX, T Series
- RIP Demand Circuits Overview
Published: 2013-04-01
Supported Platforms
Related Documentation
- ACX, EX, J, M, MX, PTX, QFX, SRX, T Series
- Example: Configuring RIP Timers
- ACX, EX, J, MX, SRX, T Series
- RIP Demand Circuits Overview
