Supported Platforms
idle-after-switch-over
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 9.5.
Statement introduced in Junos OS Release 9.5 for EX Series switches.
Statement introduced in Junos OS Release 11.3 for the QFX Series.
Description
Configure the routing device so that it does not automatically reestablish BGP peer sessions after a nonstop active routing (NSR) switchover. This feature is particularly useful if you are using dynamic routing policies because the dynamic database is not synchronized with the backup Routing Engine when NSR is enabled.
Options
forever—Do not reestablish a BGP peer session after an non-stop routing switchover until the clear bgp neighbor command is issued.
seconds—Do not reestablish a BGP peer session after an non-stop routing switchover until after the specified period.
Range: 1 through 4,294,967,295 (232 – 1)
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
