Navigation
Supported Platforms
Related Documentation
- ACX, M, MX, T Series
- Configuring Interfaces for Layer 2 Circuits
- M, MX, PTX, T Series
- Configuring Local Interface Switching in Layer 2 Circuits
ignore-mtu-mismatch
Syntax
ignore-mtu-mismatch;
Hierarchy Level
[edit logical-systems logical-system-name protocols l2circuit local-switching interface interface-name],[edit logical-systems logical-system-name protocols l2circuit neighbor address interface interface-name],[edit protocols l2circuit local-switching interface interface-name],[edit protocols l2circuit neighbor address interface interface-name]
Release Information
Statement introduced in Junos OS Release 8.5.
Support for remote PE routers added in Junos OS Release 9.2.
Description
Ignore the MTU configuration set for the physical interface associated with the local switching interface or with the remote PE router. This allows a Layer 2 circuit to be brought up between two logical interfaces that are defined on physical interfaces with different MTU values.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration
Related Documentation
- ACX, M, MX, T Series
- Configuring Interfaces for Layer 2 Circuits
- M, MX, PTX, T Series
- Configuring Local Interface Switching in Layer 2 Circuits
Published: 2012-11-29
Supported Platforms
Related Documentation
- ACX, M, MX, T Series
- Configuring Interfaces for Layer 2 Circuits
- M, MX, PTX, T Series
- Configuring Local Interface Switching in Layer 2 Circuits
