Navigation
Supported Platforms
Related Documentation
- ACX, M, PTX, T Series
- Configuring Static LSPs
- M, MX, T Series
- Example: Configuring Point-to-Multipoint LSPs with Static Routes
link-protection (Static LSPs)
Syntax
link-protection bypass-name name;
Hierarchy Level
[edit logical-systems logical-system-name protocols mpls static-label-switched-path lsp-name ingress],[edit logical-systems logical-system-name protocols mpls static-label-switched-path lsp-name transit incoming-label],[edit protocols mpls static-label-switched-path lsp-name ingress],[edit protocols mpls static-label-switched-path lsp-name transit incoming-label]
Release Information
Statement introduced in Junos OS Release 10.1.
Description
Enable link protection on the specified static LSP. Link protection helps to ensure that traffic sent over a specific interface to a neighboring router can continue to reach the router if that interface fails.
Default
Link protection is disabled.
Options
bypass-name name—Bypass LSP name.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- ACX, M, PTX, T Series
- Configuring Static LSPs
- M, MX, T Series
- Example: Configuring Point-to-Multipoint LSPs with Static Routes
Published: 2012-11-29
Supported Platforms
Related Documentation
- ACX, M, PTX, T Series
- Configuring Static LSPs
- M, MX, T Series
- Example: Configuring Point-to-Multipoint LSPs with Static Routes