Supported Platforms
Related Documentation
- EX Series, QFabric System, QFX Series standalone switches
- show lldp
- EX Series
- Understanding 802.1X and LLDP and LLDP-MED on EX Series Switches
- EX Series Switches Interfaces Overview
- QFabric System, QFX Series standalone switches
- Understanding LLDP
management-address
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 9.5 for EX Series switches.
Statement introduced in Junos OS Release 11.1 for the QFX Series.
Description
Specify the management address to be used in LLDP Management Address type, length, and value (TLV) messages. The Management Address TLV typically contains the IPv4 or IPv6 management addresses of the local system. Only out-of-band management addresses must be used for the management-address. Other remote managers can use this address to obtain information related to the local device.
Default
The LLDP Management Address TLV uses the IP address of the switch's management Ethernet interface (me0), or the IP address of the virtual management Ethernet (VME) interface if the switch is a Virtual Chassis member.
Options
ip-management-address | — | You can specify either an IPv4 or an IPv6 management address for the switch. |
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- EX Series, QFabric System, QFX Series standalone switches
- show lldp
- EX Series
- Understanding 802.1X and LLDP and LLDP-MED on EX Series Switches
- EX Series Switches Interfaces Overview
- QFabric System, QFX Series standalone switches
- Understanding LLDP
Published: 2014-05-29
Supported Platforms
Related Documentation
- EX Series, QFabric System, QFX Series standalone switches
- show lldp
- EX Series
- Understanding 802.1X and LLDP and LLDP-MED on EX Series Switches
- EX Series Switches Interfaces Overview
- QFabric System, QFX Series standalone switches
- Understanding LLDP
