Related Documentation
- ACX, M, PTX, T Series
- Optimizing Signaled LSPs
- ACX, M, MX, PTX, SRX, T Series
- optimize-timer
- M, MX, T Series
- optimize-hold-dead-delay
optimize-switchover-delay
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 11.1R1.
Description
Delays the switch over of LSPs to newly optimized paths. You only need to configure this statement on routers acting as the ingress for the affected LSPs (you do not need to configure this statement on transit or egress routers). The specified delay helps to ensure that the new optimized paths have been established before traffic is switched over from the old paths.
Options
seconds | — | Configure the time in seconds to wait before switching LSPs to newly optimized paths. |
Default: 1 second
Range: 1 through 900 seconds
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- ACX, M, PTX, T Series
- Optimizing Signaled LSPs
- ACX, M, MX, PTX, SRX, T Series
- optimize-timer
- M, MX, T Series
- optimize-hold-dead-delay
Published: 2012-11-29
Related Documentation
- ACX, M, PTX, T Series
- Optimizing Signaled LSPs
- ACX, M, MX, PTX, SRX, T Series
- optimize-timer
- M, MX, T Series
- optimize-hold-dead-delay