Supported Platforms
Related Documentation
- ACX, M, MX, PTX, QFX, T Series
- Example: Configuring BGP Prefix-Based Outbound Route Filtering
outbound-route-filter
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 9.2.
Statement introduced in Junos OS Release 9.2 for EX Series switches.
Statement introduced in Junos OS Release 11.3 for the QFX Series.
Description
Configure a BGP peer to accept outbound route filters from a remote peer.
Options
accept—Specify that outbound route filters from a BGP peer be accepted.
inet—Specify that IPv4 prefix-based outbound route filters be accepted.
inet6—Specify that IPv6 prefix-based outbound route filters be accepted.
![]() | Note: You can specify that both IPv4 and IPv6 outbound route filters be accepted. |
prefix-based—Specify that prefix-based filters be accepted.
The bgp-orf-cisco-mode statement is explained separately.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- ACX, M, MX, PTX, QFX, T Series
- Example: Configuring BGP Prefix-Based Outbound Route Filtering
Published: 2013-04-03
Supported Platforms
Related Documentation
- ACX, M, MX, PTX, QFX, T Series
- Example: Configuring BGP Prefix-Based Outbound Route Filtering