Supported Platforms
Related Documentation
- ACX, J, M, MX, PTX, QFX, SRX, T Series
- Example: Controlling the Cost of Individual OSPF Network Segments
- ACX, EX, M, MX, PTX, SRX, T Series
- metric
reference-bandwidth (Protocols OSPF)
Syntax
Hierarchy Level
Release Information
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Support for the realm statement introduced in Junos OS Release 9.2.
Support for the realm statement introduced in Junos OS Release 9.2 for EX Series switches.
Statement introduced in Junos OS Release 11.3 for the QFX Series.
Description
Set the reference bandwidth used in calculating the default interface cost. The cost is calculated using the following formula:
Options
reference-bandwidth—Reference bandwidth, in bits per second.
Range: 9600 through 1,000,000,000,000 bits
Default: 100 Mbps (100,000,000 bits)
 | Note: The default behavior is to use the reference-bandwidth value to calculate the cost of OSPF interfaces. You can override this behavior for any OSPF interface by configuring a specific cost with the metric statement. |
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- ACX, J, M, MX, PTX, QFX, SRX, T Series
- Example: Controlling the Cost of Individual OSPF Network Segments
- ACX, EX, M, MX, PTX, SRX, T Series
- metric
Published: 2013-04-03
Supported Platforms
Related Documentation
- ACX, J, M, MX, PTX, QFX, SRX, T Series
- Example: Controlling the Cost of Individual OSPF Network Segments
- ACX, EX, M, MX, PTX, SRX, T Series
- metric
