Related Documentation
- M, MX, PTX, QFX, T Series
- Example: Configuring OSPF Timers
- M, MX, PTX, T Series
- Configuring RSVP and OSPF for LMP Peer Interfaces
retransmit-interval (OSPF)
Syntax
Hierarchy Level
Release Information
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Support for the realm statement introduced in Junos OS Release 9.2.
Support for the realm statement introduced in Junos OS Release 9.2 for EX Series switches.
Description
Specify how long the routing device waits to receive a link-state acknowledgment packet before retransmitting link-state advertisements (LSAs) to an interface’s neighbors.
Options
seconds—Interval to wait.
Range: 1 through 65,535 seconds
Default: 5 seconds
![]() | Note: You must configure LSA retransmit intervals to be equal to or greater than 3 seconds to avoid triggering a retransmit trap, because Junos OS delays LSA acknowledgments by up to 2 seconds. |
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- M, MX, PTX, QFX, T Series
- Example: Configuring OSPF Timers
- M, MX, PTX, T Series
- Configuring RSVP and OSPF for LMP Peer Interfaces
Published: 2013-04-03
Related Documentation
- M, MX, PTX, QFX, T Series
- Example: Configuring OSPF Timers
- M, MX, PTX, T Series
- Configuring RSVP and OSPF for LMP Peer Interfaces