Navigation
Supported Platforms
Related Documentation
- ACX, EX, J, M, MX, PTX, T Series
- ping mpls l2circuit
- M, PTX, T Series
- Configuring Static Layer 2 Circuits
send-oam
Syntax
send-oam;
Hierarchy Level
[edit protocols l2circuit neighbor address interface interface-name static]
Release Information
Statement introduced in Junos OS Release 9.5.
Statement introduced in Junos OS Release 12.1x48 for PTX Series Packet Transport Switches.
Statement introduced in Junos OS Release 12.2 for the ACX Series Universal Access Routers.
Description
Configure the ability to ping a static pseudowire.. If you configure the send-oam statement, it applies to the backup neighbor as well. Once you have enabled this statement, you can ping the static pseudowire by issuing the ping mpls l2circuit command.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- ACX, EX, J, M, MX, PTX, T Series
- ping mpls l2circuit
- M, PTX, T Series
- Configuring Static Layer 2 Circuits
Published: 2012-12-03
Supported Platforms
Related Documentation
- ACX, EX, J, M, MX, PTX, T Series
- ping mpls l2circuit
- M, PTX, T Series
- Configuring Static Layer 2 Circuits
