Navigation
Supported Platforms
serial-options
Syntax
serial-options {clock-rate rate;clocking-mode (dce | loop);control-polarity (negative | positive);cts-polarity (negative | positive);dcd-polarity (negative | positive);dce-options {control-signal (assert | de-assert | normal);cts (ignore | normal | require);dcd (ignore | normal | require);dsr (ignore | normal | require);dtr signal-handling-option;ignore-all;indication (ignore | normal | require);rts (assert | de-assert | normal);tm (ignore | normal | require);}dsr-polarity (negative | positive);dte-options {control-signal (assert | de-assert | normal);cts (ignore | normal | require);dcd (ignore | normal | require);dsr (ignore | normal | require);dtr signal-handling-option;ignore-all;indication (ignore | normal | require);rts (assert | de-assert | normal);tm (ignore | normal | require);}dtr-circuit (balanced | unbalanced);dtr-polarity (negative | positive);encoding (nrz | nrzi);indication-polarity (negative | positive);line-protocol protocol;loopback (dce-local | dce-remote | local | remote);rts-polarity (negative | positive);tm-polarity (negative | positive);transmit-clock invert;}
Hierarchy Level
[edit interfaces se-pim/0/port]
Release Information
Statement introduced prior to Junos OS Release 7.4.
Description
Configure serial-specific interface properties.
The statements are explained separately.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
