Supported Platforms
source-address (SNMP)
Syntax
Hierarchy Level
Release Information
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Description
Set the source address of every SNMP trap packet sent by this router to a single address regardless of the outgoing interface. If the source address is not specified, the default is to use the address of the outgoing interface as the source address.
Options
address—Source address of SNMP traps. You can configure the source address of trap packets two ways: lo0 or a valid IPv4 address configured on one of the router interfaces. The value lo0 indicates that the source address of all SNMP trap packets is set to the lowest loopback address configured at interface lo0.
Default: Disabled. (The source address is the address of the outgoing interface.)
Required Privilege Level
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
