Navigation
Related Documentation
- ACX, M, PTX, T Series
- Configuring Hot Standby of Secondary Paths
- EX Series
- Configuring Path Protection in an MPLS Network (CLI Procedure)
standby
Syntax
standby;
Hierarchy Level
[edit logical-systems logical-system-name protocols mpls],[edit logical-systems logical-system-name protocols mpls label-switched-path lsp-name],[edit logical-systems logical-system-name protocols mpls label-switched-path lsp-name (primary | secondary) path-name],[edit protocols mpls],[edit protocols mpls label-switched-path lsp-name],[edit protocols mpls label-switched-path lsp-name (primary | secondary) path-name]
Release Information
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.5 for EX Series switches.
Description
Enable the path to remain up at all times to provide instant switchover if connectivity problems occur.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- ACX, M, PTX, T Series
- Configuring Hot Standby of Secondary Paths
- EX Series
- Configuring Path Protection in an MPLS Network (CLI Procedure)
Published: 2012-12-07
Related Documentation
- ACX, M, PTX, T Series
- Configuring Hot Standby of Secondary Paths
- EX Series
- Configuring Path Protection in an MPLS Network (CLI Procedure)