static (Protocols VPLS)
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 10.2.
Description
Specifies a static pseudowire for a VPLS domain. By configuring static pseudowires for the VPLS domain, you do not need to configure the LDP or BGP protocols that would normally be used for signaling. Static pseudowires require that you configure a set of in and out labels for each pseudowire configured for the VPLS domain. You can configure both static and dynamic neighbors within the same VPLS routing instance. You can also configure a static pseudowire for a backup neighbor (if you configure the neighbor as static the backup must also be static) and for a mesh group.
Options
incoming-label label—You must configure an incoming label for the static pseudowire.
Range: 29,696 through 41,983 and 1,000,000 through 1,048,575
outgoing-label label—You must configure an outgoing label for the static pseudowire.
Range: 16 through 1,048,575
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
