Supported Platforms
upstream-rate (Traffic Shaping)
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 11.4.
Support at the [edit interfaces demux0 ...] hierarchy level introduced in Junos OS Release 12.2.
Description
Specify a recommended shaping rate to be applied to upstream traffic on an interface.
For ANCP interfaces, this configured rate is used as the default value for the Juniper VSA Upstream-Calculated-Qos-Rate (26-142) when the router has not received and processed the attributes from the access node.
For L2TP, the rate is configured on an underlying PPPoE logical interface for a subscriber on an MX Series router acting as a LAC. When the subscriber is tunneled, this rate, referred to as speed for L2TP, is sent to the LNS in the ICCN message as AVP 38.
Options
rate—Traffic rate in bits per second.
Range: 1000 through 4,294,967,295 bits per second
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
