Related Documentation
- M, MX, T Series
- Example: Configuring Any-Source Multicast for Draft-Rosen VPNs
- Configuring Multicast Layer 3 VPNs
- Additional Information
- Multicast Protocols Configuration Guide
group-address (Routing Instances VPN)
Syntax
Hierarchy Level
Release Information
Statement introduced before Junos OS Release 7.4.
Starting with Junos OS Release 11.4, to provide consistency with draft-rosen 7 and next-generation BGP-based multicast VPNs, configure the provider tunnels for draft-rosen 6 anysource multicast VPNs at the [edit routing-instances routing-instance-name provider-tunnel] hierarchy level. The mdt, vpn-tunnel-source, and vpn-group-address statements are deprecated at the [edit routing-instances routing-instance-name protocols pim] hierarchy level. Use group-address in place of vpn-group-address.
Description
Specify a group address on which to encapsulate multicast traffic from a virtual private network (VPN) instance.
![]() | Note: IPv6 provider tunnels are not currently supported for draft-rosen MVPNs. They are supported for MBGP MVPNs. |
Options
address—For IPv4, IP address whose high-order bits are 1110, giving an address range from 224.0.0.0 through 239.255.255.255, or simply 224.0.0.0/4. For IPv6, IP address whose high-order bits are FF00 (FF00::/8).
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- M, MX, T Series
- Example: Configuring Any-Source Multicast for Draft-Rosen VPNs
- Configuring Multicast Layer 3 VPNs
- Additional Information
- Multicast Protocols Configuration Guide
Modified: 2015-07-24
Related Documentation
- M, MX, T Series
- Example: Configuring Any-Source Multicast for Draft-Rosen VPNs
- Configuring Multicast Layer 3 VPNs
- Additional Information
- Multicast Protocols Configuration Guide