Supported Platforms
Related Documentation
- ACX, EX, M, MX, PTX, T Series
- Limiting Routes to Be Advertised by an MVPN VRF Instance
- ACX, M, MX, SRX, T Series
- no-vrf-advertise
vrf-advertise-selective
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 10.1.
Statement introduced in Junos OS Release 12.3 for ACX Series routers.
Description
Explicitly enable IPv4 or IPv6 MVPN routes to be advertised from the VRF instance while preventing all other route types from being advertised.
If you configure the vrf-advertise-selective statement without any of its options, the router or switch has the same behavior as if you configured the no-vrf-advertise statement. All VPN routes are prevented from being advertised from a VRF routing instance to the remote PE routers. This behavior is useful for hub-and-spoke configurations, enabling you to configure a PE router to not advertise VPN routes from the primary (hub) instance. Instead, these routes are advertised from the secondary (downstream) instance.
The options are explained separately.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- ACX, EX, M, MX, PTX, T Series
- Limiting Routes to Be Advertised by an MVPN VRF Instance
- ACX, M, MX, SRX, T Series
- no-vrf-advertise
Published: 2013-04-03
Supported Platforms
Related Documentation
- ACX, EX, M, MX, PTX, T Series
- Limiting Routes to Be Advertised by an MVPN VRF Instance
- ACX, M, MX, SRX, T Series
- no-vrf-advertise
