Navigation
Supported Platforms
Related Documentation
- ACX Series
- External Clock Synchronization Overview for ACX Series Routers
- Configuring External Clock Synchronization for ACX Series Routers
- ACX, MX, PTX Series
- Synchronous Ethernet Overview
- ACX, M, PTX, T Series
- show chassis synchronization
wait-to-restore (Chassis Synchronization Source)
Syntax
wait-to-restore minutes;
Hierarchy Level
[edit chassis synchronization source interfaces]
Release Information
Statement introduced in Junos OS Release 12.2 for ACX Series Routers.
Description
Specify a time for each port to be up before opening the Ethernet Synchronization Message Channel (ESMC). When a port’s signal transitions out of the signal fail state, it must be fault free for the wait-to-restore time before it is again considered by the selection process.
Options
minutes | — | From 0 to 12 minutes |
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Documentation
- ACX Series
- External Clock Synchronization Overview for ACX Series Routers
- Configuring External Clock Synchronization for ACX Series Routers
- ACX, MX, PTX Series
- Synchronous Ethernet Overview
- ACX, M, PTX, T Series
- show chassis synchronization
Published: 2013-01-11
Supported Platforms
Related Documentation
- ACX Series
- External Clock Synchronization Overview for ACX Series Routers
- Configuring External Clock Synchronization for ACX Series Routers
- ACX, MX, PTX Series
- Synchronous Ethernet Overview
- ACX, M, PTX, T Series
- show chassis synchronization
