Navigation
[edit interfaces] Hierarchy Level
The following CoS statements can be configured at the [edit interfaces] hierarchy level. This is not a comprehensive list of statements available at the [edit interfaces] hierarchy level. Only the statements that are also documented in this manual are listed here. For more information about interface configuration, see the Junos® OS Network Interfaces.
[edit interfaces]interface-name {atm-options {linear-red-profiles profile-name {high-plp-max-threshold percent;low-plp-max-threshold percent;queue-depth cells high-plp-threshold percentlow-plp-threshold percent;}plp-to-clp;scheduler-maps map-name { forwarding-class class-name {epd-threshold cells plp1 cells;linear-red-profile profile-name;priority (high | low);transmit-weight (cells number | percent number);}vc-cos-mode (alternate | strict);}}per-unit-scheduler;shared-scheduler;schedulers number;unit logical-unit-number {atm-scheduler-map (map-name | default);copy-tos-to-outer-ip-header;family family {address address {destination address;}filter {input filter-name;output filter-name;}policer {input policer-name;output policer-name;}simple-filter {input filter-name;}}layer2-policer {input-policer policer-name;input-three-color policer-name;output-policer policer-name;output-three-color policer-name;}plp-to-clp;shaping {(cbr rate | rtvbr peak rate sustained rate burst length |vbr peak rate sustained rate burst length);}vci vpi-identifier.vci-identifier;}}
On the Juniper Networks MX Series Ethernet Services Routers with Enhanced Queuing DPCs and on M Series and T Series routers with IQ2E PIC, you can configure the following CoS statements at the [edit interfaces] hierarchy level:
hierarchical-scheduler;interface-set interface-set-name {ethernet-interface-name {[interface-parameters];}}
