Navigation
[edit logical-systems] Hierarchy Level
The following lists the statements that can be configured at the [edit logical-systems] hierarchy level that are also documented in this manual. For more information about logical systems, see the Junos OS Routing Protocols Configuration Guide.
logical-systems logical-system-name {interfaces interface-name {unit logical-unit-number {accept-source-mac {mac-address mac-address {policer {input cos-policer-name;output cos-policer-name;}}}allow-any-vci;atm-scheduler-map (map-name | default);bandwidth rate;backup-options {interface interface-name;}cell-bundle-size cells;clear-dont-fragment-bit;compression {rtp {f-max-period number;port {minimum port-number;maximum port-number;}queues [ queue-numbers ];}}compression-device interface-name;description text;interface {l2tp-interface-id name;(dedicated | shared);}dialer-options {activation-delay seconds;deactivation-delay seconds;dial-string [ dial-string-numbers ];idle-timeout seconds;initial-route-check seconds;load-threshold number;pool pool;remote-name remote-callers;watch-list {[ routes ];}}disable;dlci dlci-identifier;drop-timeout milliseconds;dynamic-call-admission-control {activation-priority priority;bearer-bandwidth-limit kilobits-per-second;}encapsulation type;epd-threshold cells plp1 cells;fragment-threshold bytes;input-vlan-map {inner-tag-protocol-id;inner-vlan-id;(pop | pop-pop | pop-swap | push | push-push | swap | swap-push | swap-swap);tag-protocol-id tpid;vlan-id number;}interleave-fragments;inverse-arp;layer2-policer {input-policer policer-name;input-three-color policer-name;output-policer policer-name;output-three-color policer-name;}link-layer-overhead percent;minimum-links number;mrru bytes;multicast-dlci dlci-identifier;multicast-vci vpi-identifier.vci-identifier;multilink-max-classes number;multipoint;oam-liveness {up-count cells;down-count cells;}oam-period (seconds | disable);output-vlan-map {inner-tag-protocol-id;inner-vlan-id;(pop | pop-pop | pop-swap | push | push-push | swap | swap-swap);tag-protocol-id tpid;vlan-id number;}passive-monitor-mode;peer-unit unit-number;plp-to-clp;point-to-point;ppp-options {chap {access-profile name;default-chap-secret name;local-name name;passive;}compression {acfc;pfc;}}dynamic-profile profile-name;pap {default-pap-password password;local-name name;local-password password;passive;}}proxy-arp;service-domain (inside | outside);shaping {(cbr rate | rtvbr peak rate sustained rate burst length | vbr peak rate sustained rate burst length);queue-length number;}short-sequence;transmit-weight number;(traps | no-traps);trunk-bandwidth rate;trunk-id number;tunnel {backup-destination address;destination address;key number;routing-instance {destination routing-instance-name;}source source-address;ttl number;}vci vpi-identifier.vci-identifier;vlan-id number;vlan-id-list [vlan-id vlan-id–vlan-id]vlan-tags inner tpid.vlan-id outer tpid.vlan-id;vlan-tags outer tpid.vlan-id inner-list [vlan-id vlan-id–vlan-id]vpi vpi-identifier;family family {accounting {destination-class-usage;source-class-usage {direction;}}bundle interface-name;filter {group filter-group-number;input filter-name;input-list {[ filter-names ];}output filter-name;output-list {[ filter-names ];}}ipsec-sa sa-name;keep-address-and-control;mtu bytes;multicast-only;no-redirects;policer {arp policer-template-name;input policer-template-name;output policer-template-name;}primary;proxy inet-address address;receive-options-packets;receive-ttl-exceeded;remote (inet-address address | mac-address address);rpf-check <fail-filter filter-name> {<mode loose>;}sampling {direction;}service {input {service-set service-set-name <service-filter filter-name>;post-service-filter filter-name;}output {service-set service-set-name <service-filter filter-name>;}}(translate-discard-eligible | no-translate-discard-eligible);(translate-fecn-and-becn | no-translate-fecn-and-becn);unnumbered-address interface-name destination address destination-profile profile-name;address address {arp ip-address (mac | multicast-mac) mac-address <publish>;broadcast address;destination address;destination-profile name;eui-64;multipoint-destination address (dlci dlci-identifier | vci vci-identifier);multipoint-destination address {epd-threshold cells plp1 cells;inverse-arp;oam-liveness {up-count cells;down-count cells;}oam-period (seconds | disable);shaping {(cbr rate | rtvbr peak rate sustained rate burst length | vbr peak rate sustained rate burst length);queue-length number;}vci vpi-identifier.vci-identifier;}preferred;primary;(vrrp-group | vrrp-inet6-group) group-number {(accept-data | no-accept-data);advertise–interval seconds;authentication-type authentication;authentication-key key;fast-interval milliseconds;(preempt | no-preempt) {hold-time seconds;}priority-number number;track {priority-cost seconds;priority-hold-time interface-name {interface priority;bandwidth-threshold bits-per-second {priority;}}route ip-address/mask routing-instance instance-name priority-cost cost;}}virtual-address [ addresses ];}}}}}
